Laip Srl

Stamping press

Automatic pneumatic stamping press

To be used for pressing any fibre in dyeing baskets. The machine is made up by a strong platform in steel sheets and electro welded profiles where the dyeing baskets are placed and connected with special blockings.

Behind the platform there is a column, where, in top, are placed the mechanism for the for the alternative vertical movement of the 2 rods made out of light alloy. The continuous and reciprocating movement of both rods is made by drop and that gives a strong ramming of the material that has to be gradually put in the baskets.

The machine has a special shower on the column that is giving a constant pressure inflow of water (connection to the water lined to be performed by buyer) .The rammer is of strong manufacture and requires only a minimum of maintenance

All the working operations are made automatically by a separated electric control panel.

Machine completed with stainless steel container ø1670

Dyeing machine 98 °C

Such plant has different and several capacity of atmospheric dyeing machine able to dye fine wool fibre like angora, cachemire or similar. max capacity approx 100 kg.

Dyeing machine 140 °C

Dyeing machine 140 °C mod.200 HT

Autoclave working with unidirectional centrifuge pump especially design for loose fibre dyeing.

Machine working at 140 °C – 4.5 bar.

Machine available:

n°1 m/c with 3 cakes
n°1 m/c with 2 cakes
n°3 m/c with 3 cakes
machine fully automatic with controller and air pad system.

Centrifuge

Centrifugal hydroextractor type D. 1700

Technical description:

Revolving cage: in stainless steel is well balanced statically and dynamically and is suitable strengthened with steel rings.

Base: is formed by sturdy triangle, shaped in steel. On this are arranged 3 supporting studs with a sphere-shaped oscillating connection. The base which supports the revolving cage is in cast iron.

Cage base in cast iron: it is circular shaped. The cage pivoting upon a conical support. On this support the steel cage shaft turns assembled on all bearings and lubrificated by oil.

External plating: This machine is manufactured in stainless steel sheet. It is strongly connected and rust-proof at the cast iron base. The external plating may be easily removed for internal inspection.

Control of the machine: the hydro extractor has the revolving cage driven by an electric motor, attached to a support on the side of the cast-iron base. On its shaft a special clutch pulley with brake lining is arranged for the progressive starting of the unit. The drive from the motor, to the central pulley is through V belts.

Brake: the hydro extractor is equipped with a tape brake which acts directly on an apposite rings, of large diameter on the cast-iron base of the cage. Its functioning is semiautomatic, actuated by a hand lever from lesff toward right you interrupt the current to the motor and a gradual stopping in the minimum of allowed time.

Main features:

Diameter basket : mm 1700
Height : mm 800
Rpm : 550
Electric motor : hp 25
Maximum dry load : kg. 300

Centrifuge Dettin

Belt hot dryer

AUTOMATIC HOPPER FEEDER
TECHNICAL FEATURES

Available either in the standard size or extra long for very large production requirements. Delivery spiked lattice made of PVS non-static belt supported by seasoned beech-wood bars-stainless steel pins. Doffing comb on delivery provided with set of brushes and blandes for efficent combined action. The comb has a ø 300 mm. to prevent problems from winding up of fibres around the same drive to the two above combs is by variable speed units.

N°1 HIGH PRODUCTION DRYING UNIT MOD.SD WITH N°3 CHAMBERS
COMPLETE WITH HOPPER FEEDER PROVIDED WITH:

Electrical panel for the generals controls of the machine.Equipment for adjusting automatically the temperature in the chamber.

DRYING UNIT
Modular design for for easier addition of supplementary chambers at a later stage.Machine frame on carrying structure made of steel sections and cold-printed sheets.Useful working lenght of each drying chamber: 3300 mm Useful working widht:2000 mm

DRYING TECHNIQUE
Hot air distribution is through perforated metal panels with different diameters of the holes allowing for a most distribution of the heat into the material and thus the highest efficeny. The perforated panels are very easy to remove for occasioanl cleaning and maintenance.The air flow is from powerful blowing fans,min.800 Cubic/meter per minute. The fans are protected with zinc-plated steel nets easy to remove for cleaning. Recovery of hot air for re-cycling is through the lateral tunnels and exaust of satured air through the top smoke-hood

ELECTRIQUE CONTROL CABINET

Self-standing and separated from the machine body.
Including all necessaru appliances like voltmeter,ammeter, pushbottons,waring lights and the like.

AUTOMATIC TEMPERATURE CONTROL
Steam laminating system through motorised valve being controlled by thermostat for setting or required temperature within wide range.

TECHNICAL DATA

TYPE HIGH PRODUCTION DRYER "SD"
ZONE N° 3
VOLTAGE : 380/660 V 50 HZ
OUTPUT : KG.150/200/H UMIDITY WASTE 7/8%

Radio Frequency dryer

Belt type radio frequency dryer type 50 kw and 60 kw for loose fibre and cones dyeing

Automatic baling press

Automatic baling press machine able to press the fibre comes from the belt dryer

Baling press